Toyana 7208 A-UX angular contact ball bearings

d1:690 mm; Mass lock nut:59.7 kg; Lock washer / Locking clip:MS 30/630; B5:97 mm; Associated eyebolt for handling:M 10; d3:730 mm; b:45 mm; h:20 mm; d2:658 mm; G:Tr 630x6;

Basic Static Radial Load Rating Co:4250 N; Grease Speed Rating n1:17000 rpm; D:35.0000 mm; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:24000 rpm; B:11.00 mm; Basic Dynamic Radial Load Rating C:8840 N; d:15.000 mm;

D:72.0000 mm; Old MRC Bearing Number:207FFS; Fillet Radius ra:1.00 mm; Width - Inner Ring B1:25.00 mm; Basic Interchange BCA:-; Width - Outer Ring B0:17.0 mm; Basic Interchange FAF:207KLL; Speed Rating-Single and Double Sealed Grease SDG:6300 rpm; Basic Radial Load Rating-Static SCO:15300 N; Width -

d:55.000 mm; Oil Speed Rating n2:5600 rpm; Sealed Speed Rating n3:4300 rpm; B:33.30 mm; Grease Speed Rating n1:4300 rpm; Basic Dynamic Radial Load Rating C:57200 N; Basic Static Radial Load Rating Co:47500 N; Fillet Radius ra:1.50 mm; Accessories:One Seal; D:100.0000 mm;

B:565.15 mm; D1 ≈:860 mm; Comparative radial load rating CF:3600 kN; Design variant/feature:TQO.1/GWI; Calculation factor e:0.33; Thrust factor K:1.76; T:565.15 mm; d1 ≈:768 mm; d:717.55 mm; r3,4 min.:6.4 mm;

B:42.9 mm; A5:32.5 mm; Basic dynamic load rating C:21.6 kN; Fatigue load limit Pu:0.655 kN; Recommended tightening torque for grub screw:6.5 N·m; H:93 mm; Basic static load rating C0:15.3 kN; B4:6 mm; A:45 mm; J min.:119 mm;

Permissible angular misalignment α:1.5 °; d:25 mm; Mass bearing:0.34 kg; d2 ≈:32.8 mm; Limiting speed:7500 r/min; Basic static load rating C0:5.4 kN; Da max.:55 mm; D2 ≈:52.7 mm; Fatigue load limit Pu:0.28 kN; Basic dynamic load rating C:19 kN;

ra max.:1.5 mm; Calculation factor e:0.43; Limiting speed:4300 r/min; Ca min.:6 mm; T:64 mm; Calculation factor Y2:2.3; D:140 mm; Calculation factor Y0:1.6; Calculation factor Y1:1.6; d:90 mm;

J1:50.8 mm; P60°:35.6 kN; Bearing limiting speed:7500 r/min; J max.:241.3 mm; P120°:13.3 kN; Cap bolt recommended tightening torque:149.1 N·m; H2:30.163 mm; J min.:206.375 mm; Stabilizing ring:2 x SR-1611; Initial grease fill:68.04 g;

d:55 mm; Pu:11.180 kN; d1:105 mm; D:105 mm; Grease:1 900 min-1; rs (min):1.1 mm; H:35 mm; dynamic Cr:122.570 kN; D1:57 mm; Oil:2 500 min-1;

B2:20.5 mm; d1 ≈:139.5 mm; d:100 mm; B1:13 mm; Mass angle ring:0.87 kg; r3,4 min.:3 mm;

Q150°:3350 kN; Cap bolt, rec. tightening torque:850 N·m; Mass housing:709 kg; A:460 mm; Cap bolt, size:M 42x280; H2:130 mm; Eye bolt, size:2 x M 42; A1:420 mm; P0°:7600 kN; bc:243.5 mm;

D:145 mm; r3,4 min.:0.6 mm; Da max.:100 mm; N:8.8 mm; Basic static load rating C0:232 kN; Number of attachment bolts:8; Frictional moment:1 N·m; r1,2 min.:0.6 mm; ra max.:0.6 mm; d:60 mm;

Oil Speed Rating n2:18000 rpm; B:14.00 mm; d:20.000 mm; D:47.0000 mm; Basic Static Radial Load Rating Co:8500 N; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:14000 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:15000 rpm;

Limiting speed:11000 r/min; Basic static load rating C0:50 kN; Mass needle roller and cage assembly:0.039 kg; Reference speed:10000 r/min; Designation associated G design radial shaft seal with a low cross-sectional height:G 40x47x4; Fatigue load limit Pu:6.1 kN; U:18 mm; Designation associated SD d